Démarrez la fête avant l’heure. Découvrez nos produits les plus vendus. ACHETER.

LIENS RAPIDES

Écouteurs Bose QuietComfort Bose Sleepbuds™ II Bose Noise Cancelling Headphones 700 Lunettes Bose Frames Écouteurs Bose Sport Earbuds

Suggestions

Meilleurs résultats

Contenu connexe

Cancel

Casque Bose QuietComfort Ultra (2e génération)

Vendu depuis 2025

CE N’EST PAS VOTRE PRODUIT ?
Aidez-nous à vous offrir la meilleure assistance possible en confirmant votre produit ci-dessous
Select your product
Product image
OPTIONS D'ASSISTANCE POUR
Chargement en cours
RECHERCHER
Entrez un terme à rechercher dans le champ ci-dessus.
La recherche ne donne aucun résultat. Veuillez saisir une requête valide (par exemple : aide à la connexion, aucun son dans mes écouteurs, etc.).

L’application Bose ne détecte pas le produit

Si l’application ne trouve pas le produit que vous avez déjà ajouté à votre compte Bose, il se peut qu’elle affiche « en cours de recherche » ou « indisponible » lorsque vous essayez de sélectionner ce produit. Dans certains cas, le produit peut ne pas apparaître dans l’application s’il n’est pas trouvé. Pour résoudre ce problème, essayez ce qui suit :

Bose app does not detect product | Bose QuietComfort Ultra Headphones (2nd Gen)

Reboot your headphones.

This reset will not erase your product settings.
  1. If the USB charging cable or audio cable is connected to your headphones, disconnect it.
  2. Connect a USB charging cable and charger to a power outlet. You can also connect the USB cable to a USB port on a computer that is powered on.
    Note: Do not connect your headphones to the USB cable yet.
  3. On your headphones, press and hold the Power/Bluetooth® button.
  4. While continuing to hold the button, connect the USB cable to the right earcup. The Power light on your headphones will quickly blink twice.
  5. Once connected, wait two seconds and then release the Power/Bluetooth button.
    Tip: If your headphones don't respond after this, reset them a second time.

Be sure you are using the Bose app.

There are several Bose apps designed for different products. Your product works with the Bose app icon. For more info, see Downloading the Bose app.

In the Bose app, swipe down on the "My Bose" screen to refresh the device list.

If you're trying to connect in the Bose app, and your product is not showing or connecting on the "My Bose" screen, you can pull the screen down to refresh the device list.

Check if Microsoft Teams is running on a nearby PC to which you’ve previously paired your headphones or earbuds.

If so, the PC could take control of the Bluetooth LE (Low Energy) signal your product uses to enable discovery by the Bose app. To resolve the issue, quit Microsoft Teams on the PC and remove any "LE-Bose" listings in the Bluetooth menu of your PC. The non-LE pairing can remain as this will allow for quick reconnection of your headphones or earbuds to your PC.

Reboot the device running the Bose app.

Electronics might need to be rebooted from time to time to correct minor issues. This is typically done by powering off the device completely and then powering it back on again.

Close and re-open the Bose app.

Closing an app varies by device and operating system. Common methods for mobile devices are shown below:

On iOS devices:
  1. Depending on your iOS device, either double-tap the Home button or swipe up from the bottom center of the screen to view active apps
  2. Swipe left or right to find the app you want to close
  3. Swipe up on the app to close it.
On Android devices:
  1. On the home screen, press and hold the app icon
  2. Tap App info from the pop-up that appears
  3. On the App Info screen, tap Force Stop.

In the Bose app, sign out of your Bose account and then sign back in.

For more information, see Signing in and out of a Bose account.

If using iOS 13 or newer, be sure Bluetooth® permissions are enabled for the Bose app.

When you first install the Bose app on an iPhone or iPad with iOS version 13 or newer, you will be prompted to allow Bluetooth permissions for the app. You must allow this for the app to work properly. To check that Bluetooth is allowed for the app, do one of the following on your iOS device:
  • Go to Settings > Privacy > Bluetooth and enable Bluetooth permissions for the Bose app
  • Go to Settings, then scroll down and select the Bose app. Under Allow Bose To Access, enable Bluetooth

In your mobile device settings, be sure location and network permissions are turned on for the app.

Location permissions are used by the Bose app to detect and control your product. If location settings are disabled for the app, it will not work properly.
  • For iOS devices:
    1. Go to Settings > Privacy > Local Network and be sure it is not disabled for the Bose app
    2. Go to Settings > Privacy > Location Services and be sure it is not disabled for the Bose app
  • For Android devices, touch and hold the app icon, then tap App Info from the pop-up that appears. On the App Info screen, tap Permissions and be sure Your location is enabled.

Check for and install any available product updates.

On a computer, visit btu.bose.com and follow the instructions to ensure your product has the latest features and enhancements. See Checking the software or firmware version and Updating the software or firmware of your product.

In the Bose app, remove your product and then re-add it.

Uninstall and reinstall the Bose app.

In case an issue occurred with the app, uninstall it from your device, download and reinstall it, then try again.

Try the app on a different mobile device.

If available, download and install the Bose app on another device to determine if the issue is related to the first device or its settings.
Avez-vous trouvé cet article utile ?
Oui Non
Envoyer
Nous vous remercions de votre participation.